Turtle Pond

Wednesday, August 19, 2009

Days that make it all worth it

Sometimes, my job is just awesome. I know most of you might consider this a nightmare, but spending 3 days making up these panels and contactors is like eating 3 meals of just dessert.










And yes, I know where every single wire goes and what it is for.

Labels: , ,

Sunday, September 7, 2008

Randy, your computer's on fire!

Not exactly the most wonderful way to wake up in the morning. Yet several days ago, that is exactly what came bellowing from the kitchen as I was still trying to fully awaken - a process that normally takes me about a half an hour, but that morning only took seconds. I rushed to my computer (which is not in the kitchen, but adjacent to it) and heard several loud pops and smelled the telltale smoke of frying electronics. I've been down this road before with poor quality power supplies, and I simultaneously cringed both on the inside and outwardly.

I quickly yanked the power cord, disconnected the signal cable, powered down my computer, and unplugged it too, just for good measure. I've been running dual monitors for nearly 8 years now, and I don't know how I'd keep my sanity without them. I can have music players, browsers, email, and photos all open at the same time without interfering with each other. I loooove it. The last couple of days have been rough. Today, I had finally had enough of the lonely, blank screen on the right side of my desk. It was toast, out of warranty, and doing nothing helpful. I had three options.
  1. I could simply toss it and accept that I would have to shell out a couple hundred dollars for a new monitor that wouldn't match the existing one - naaaa!
  2. I could buy two new monitors that matched for closer to $500 - Hell no.
  3. I could tinker
Oh yes, let the tinkering begin! Now I do have experience with electricity, electronics, and mechanics in general, so it wasn't just a shot in the dark, but I didn't have high expectations. Usually, when sensitive electronics go south, they do so in style by frying the tiny transistors that you cannot see or possibly hope to repair. I was hoping for a blown capacitor. That, with a little work, I could probably fix. What I found was a traditional Hawaiian electrical short-circuit.

A gecko.

Fried.

On the circuit board.

After removing said charred reptile (he was tiny, at about 1 inch long), and cleaning the traces the best I could, I reassembled the monitor and crossed my fingers. Success! Dual 19 inch LCD web-browsing bliss!

This goes to prove that when you have little to lose, it doesn't hurt to try to repair stuff, and that Geico will be recieving a strongly-worded letter from me about the practices of their spokesanimals.

I wish I had taken pictures. Sorry. I say this is common because in Hawaii, these little bastards get into everything. I love them. They're cute, and they eat insects, but they have the two undesireable traits of getting into everything and pooping all over the place. I find gecko bodies in the bussing of old electrical panels all the time. "Oooh, this is nice and warm. and. tingly..." 240 Volts across the bussing does them in every time.

Labels: ,

Saturday, August 9, 2008

Greatest drill bits EVER!



Normally, we have to get pretty pissed about something in order to blog about it, right? I'm attempting to turn the tide and actually blog about something positive (besides the generic NyQuil - sweet, sweet, non-congested angel of sleep!). I picked up 4 of these drill bits on Amazon a couple weeks ago when I was in a shopping frenzy:
http://www.amazon.com/WoodOwl-03807-Tri-Cut-18-Inch-Chipper/dp/B0009OAJMQ
http://www.amazon.com/WoodOwl-03809-Tri-Cut-18-Inch-Chipper/dp/B0009OAJNA
http://www.amazon.com/WoodOwl-03707-Tri-Cut-8-Inch-Chipper/dp/B0009OAJHQ
http://www.amazon.com/WoodOwl-03709-Tri-Cut-4-Inch-Chipper/dp/B0009OAJIA


The only drawback I can find for these bits is the utter necessity to wear gloves and eye protection. If they encounter a nail, they will not bind or kill the end of your bit. They will shower you with molten bits of nail as they plow on through. No more filing the tip of the auger bit trying to get a few more holes out of it.

I'll update if/when one of these bits actually dies. They also self-feed like a mother@#*%^! The 7-1/2" lengths are great for the cordless drill. It's a little more awkward and sharp to carry around in your bags than a regular paddle bit, but I used to buy 5/8" paddle bits in bulk before this! They also work awesome in the Hole Hawg/right angle corded drill. I didn't see them in 7/8" diameters, but I've been doing fine with the 3/4", and they have 1" and bigger, too.

There are some other WoodOwl tri-blade bits that are non-nail-eating, but leave clean holes. I haven't tried them yet, and have no need. The ones I bought will leave some sparring at the front and backs of the holes, but the hole itself is pristine and I don't have to knock out a big chip of wood on the backside before I pull wire like I do with the traditional ship auger bits.

Labels: , , ,